BF-650V Vertical Machining Center
High precision and high efficiency series.
High speed high precision VMC for molds processing
Baofeng utilizes its mature vertical machining centers techniques to present you with the BF-650V, which is special design for the industries in 3C component machining and small die-&-mold machining, it can continuously complete drilling, milling, tapping, boring, reaming and other machining processes by once clamping, and can complete coordinate boring and fine machining of complicated parts and molds accurately and efficiently. BF-650V is broadly used in high precision parts and molds manufacturers, can fully present high precision and high efficiency machining ability at a very reasonable cost.
|X/Y/Z axis travel||mm||650*500*500|
|Max load on table||kg||400|
|Spindle center to column||mm||480|
|Spindle nose to table||mm||150-600|
|X/Y/Z axis motor||KW||2.0/2.0/3.0|
|X/Y/Z rapid feed||m/min||30/30/30|
|Controller||Mitsubishi M80A/M80B Fanuc: 0i-MF/Siemens 828D|
- High grade gray casting machine body design through The Finite Element Method (FEA) analysis to keep light-weighted structure advantages while ensuring high machine rigidity.
- All rail mounting surfaces through milling and grinding to ensure excellent precision and contact rates above 90%.
- All joint surfaces of the machine body though manually scraped to ensure geometric accuracy and contact rigidity.
- Special large span structure of the machine base and column, is able to bear high inertia gravity and improve dynamic responsiveness of the whole machine.
- V1 vibration standard of BBT40 direct drive spindle, compared with most popular V4 vibration standard, has smaller spindle vibration and better surface processing performance.
◆Kindly notice that configuration and appearance are subject to fine products.
|1||Mitsubishi M80B controller system|
|2||BBT40 12000rpm direct drive spindle|
|3||Spindle blowing system|
|4||Spindle oil cooler|
|5||Automatic centralized lubrication system|
|7||Coolant flushing system|
|8||Heat exchanger for electrical cabinet|
|9||Rear chip-removal device|
|13||Full enclosed cover|
|15||4th axis interface|
|1||Mitsubishi M80A controller|
|2||Fanuc 0i-MF controller|
|3||Siemens 828D controller|
|4||12000/15000rpm BBT40 spindle|
|5||Coolant through spindle|
|6||BT40 24T/30T arm type tool magazine|
|7||Chain type chip conveyor|
|8||4th axis rotary table|
HT300 gray casting strengthened ribs machine head to reduce the vibration during rapid feed, ensure surface smoothness and machining accuracy.
HT300 gray casting large span A type Box structure column, improving rigidity to ensure stability during machining.
HT300 gray casting double layered box type base with 6 base support to increase rigidity and torsion resistance.
Direct drive spindle with spindle oil coolant and workpiece coolant device, effectively suppressing heat extension, ensure the machining accuracy and surface smoothness.
X/Y/Z axis 2 Rexroth sliders each guideway to increase the stability and accuracy during machining.
X/Y/Z axis adopt Germany Rexroth ball linear guideway to Improve processing speed and accuracy.
C3 grade high precision Japan NSK screw with pre-extension process to improve the transmission rigidity and machine accuracy.
Mitsubishi/Fanuc/Siemens controller system optional.