| Parameter | Unit | BF-1370VP |
| X/Y/Z axis travel | mm | 1300*700*700 |
| Table size | mm | 1450*700 |
| T slot | mm | 5-18*152.5 |
| Max load on table | kg | 1500 |
| Spindle center to column | mm | 750 |
| Spindle nose to table | mm | 140-840 |
| X/Y/Z axis motor | KW | 4.5/4.5/4.5 |
| X/Y/Z rapid feed | m/min | 30/30/30 |
| Controller | Mitsubishi: M80A/M80B Fanuc: Oi-MF/Siemens 828D | |
| Spindle taper | BBT40 | |
| Spindle speed | rpm | 15000 |
| Spindle motor | HP | 22(18.5KW) |
| Positioning accuracy | mm | ±0.003/300 |
| Repeated accuracy | mm | ±0.002/300 |
| Air pressure | kg/cm² | 6～7bar |
| Dimension | mm | 3630*3100*3180 |
| Weight | kg | 10500 |
- As the most distinctive model,BF-1370V has an innovative design, fully-supportting box-type base structure, Y axis aboving to X axis, ensuring that the table always maintains full support in the X/Y axis maximum machining range, avoiding the hanging situation when table moving to the far left and right.
- Inverted T-shaped design base, which is usually used on the HMC, its structural stability and rigidity is better than the traditional VMC. Besides, the base adopt double-layer box structure, which will increase the weight by 30%, also the stability, resistance to deformation and rigidity of the base will be much higher than the ordinary single-layer structure.
- X/Y/Z axis could option large-diameter hollow design oil-cooled screw, constant temperature cooling oil sent from the inner tube to the end of the screw and then return, discharge the heat generated by the movement of the screw , long-term machining will not lead to drift of the workpiece center caused by thermal expansion
Machine head
Strengthened cross-ribs to increase bending and torsion resistance.
Strengthened cross-ribs to increase bending and torsion resistance.
Column
Box structure large span A type column with high rigidity to ensure stability during machining.
Box structure large span A type column with high rigidity to ensure stability during machining.
Base
Double layered box type base to ensure high stability and rigidity.
Double layered box type base to ensure high stability and rigidity.
Saddle
Double T extra-wide structure to improve rigidity and stability during rapid feed.
Double T extra-wide structure to improve rigidity and stability during rapid feed.
Spindle head
Box structure spindle head to increase cutting rigidity, improve the machining efficiency.
Box structure spindle head to increase cutting rigidity, improve the machining efficiency.
Guide way
3 axis ball/roller linear guideway, rapid feed is 48m/min.
3 axis ball/roller linear guideway, rapid feed is 48m/min.
Slider
X / Z axis guideway 3 sliders to increase the stability and accuracy during machining.
X / Z axis guideway 3 sliders to increase the stability and accuracy during machining.
Screw
C3 grade high precision ball screw with pre-extension process, improve the transmission rigidity and machine accuracy.
C3 grade high precision ball screw with pre-extension process, improve the transmission rigidity and machine accuracy.
Spindle
Belt/direct drive spindle with spindle oil coolant and blowing system to ensure spindle precision and stability under high speed running.
Belt/direct drive spindle with spindle oil coolant and blowing system to ensure spindle precision and stability under high speed running.
Controller system
Mitsubishi/Fanuc/Siemens controller system optional.
Mitsubishi/Fanuc/Siemens controller system optional.
Hollow oil cooling screw
BF-1370VP 3 axis adopt hollow oil cooling screw, reduce the drift of workpiece center caused by thermal expansion.
BF-1370VP 3 axis adopt hollow oil cooling screw, reduce the drift of workpiece center caused by thermal expansion.
Innovative machine body structure
Y axis is above to X axis, which ensures the table always maintains full support in the processing range, avoiding the hanging situation.
Y axis is above to X axis, which ensures the table always maintains full support in the processing range, avoiding the hanging situation.
◆Kindly notice that configuration and appearance are subject to fine products.
Standard Accessories
Optional Accessories
| Item | Name |
| 1 | Mitsubishi M80B controller system |
| 2 | BBT40 10000rpm direct drive spindle |
| 3 | Spindle blowing system |
| 4 | Spindle oil cooler |
| 5 | Automatic centralized lubrication system |
| 6 | Pneumatic system |
| 7 | Coolant flushing system |
| 8 | Heat exchanger for electrical cabinet |
| 9 | Double screw type chip conveyor |
| 10 | Operation manuals |
| 11 | Alarming light |
| 12 | Working light |
| 13 | Full enclosed cover |
| 14 | Guideway cover |
| 15 | 4th axis interface |
| Item | Name |
| 1 | Mitsubishi M80A controller |
| 2 | Fanuc 0i-MF controller |
| 3 | Siemens 828D controller |
| 4 | 12000/15000rpm BBT40 spindle |
| 5 | 11000rpm BBT50 spindle |
| 6 | Coolant through spindle |
| 7 | BT40 24T/30T arm type tool magazine |
| 8 | Chain type chip conveyor |
| 9 | 4th axis rotary table |
High precision and high efficiency series
It can continuously complete drilling, milling, tapping, boring, reaming and other machining processes by once clamping, and can complete coordinate boring and fine machining of complicated parts and molds accurately and efficiently. This series of vmc vertical machining center is widely used for mass production of small and medium-sized cabinets, covers, panels, shells and plates in high-precision molds, automobiles, machinery, instrumentation, light industrial textiles, electronic instruments, precision metal products, precision mold products and machinery manufacturing industries.
