BF-5029 Double Column Type Machining Center
Table: 5000*2400mm
Travel: 5200/3300/1000mm
Guideway: X/Y axis linear way, Z axis box way
BF-5029 Double Column Type Machining Center
It is mainly used for the processing of large mechanical parts and molds. It can meet the numerical control processing requirements of many kinds of precision parts such as basic large parts, plates, pan heads, molds etc. It is widely used in processing of general mechanical parts, automobile molds, stamping molds, shipping molds, precision mechanical parts, large electronic product case and etc.
| Parameter | Unit | BF-5029 Double Column Type Machining Center |
| X/Y/Z axis travel | mm | 5200*3300*1000 |
| Table size | mm | 5000*2400 |
| T slot | mm | 12-26*200 |
| Max load on table | kg | 28000 |
| Width of gantry | mm | 2900 |
| Spindle nose to table | mm | 280-1280 |
| X/Y/Z axis motor | KW | 9.0/7.0/7.0 |
| X/Y/Z rapid feed | m/min | 12/12/12 |
| Controller | Mitsubishi: M80A/M80B Fanuc: Oi-MF/Siemens 828D | |
| Spindle taper | BT50 | |
| Spindle speed | rpm | 6000 |
| Spindle motor | HP | 26(22KW) |
| Positioning accuracy | mm | ±0.005/300 |
| Repeated accuracy | mm | ±0.003/300 |
| Air pressure | kg/cm² | 6～7bar |
| Dimension | mm | 11000*6000*5000 |
| Weight | kg | 527000 |
Item | Name |
1 | Mitsubishi M80B controller system |
2 | Spindle blowing system |
3 | Full enclosed cover |
4 | Auto lubrication system |
5 | Workpiece coolant system |
6 | Spindle encoder position system |
7 | 3 axis inner encoder feedback system |
8 | Spindle oil coolant system |
9 | Leveling bolts and blocks |
10 | Screw type chip conveyor and chip tray |
11 | Heat exchanger |
12 | Operation unit |
13 | RS232 interface |
14 | Alarming light |
15 | Working light |
16 | Guide way cover |
17 | Basic installation kit |
18 | Accessories |
19 | Tool and tool box |
20 | Files |
Item | Name |
1 | Gear head 6000rpm |
2 | Mitsubishi/Fanuc/Siemens system |
3 | Milling head 0°/90°/180°/270° |
4 | Arm type tool magazine |
5 | ZF Gear box |
6 | Chain type chip conveyor |