BF-T600 Vertical Tapping Machine
Model: BF-T600 Vertical Tapping Machine
Table: 700*420mm
Travel: 600*400*300mm;
Guideway: X/Y/Z axis linear way
Table: 700*420mm
Travel: 600*400*300mm;
Guideway: X/Y/Z axis linear way
Parameter | Unit | BF-T600 Vertical Tapping Machine |
X/Y/Z axis travel | mm | 600*400*300 |
Table size | mm | 700*420 |
T slot | mm | 3-14*135 |
Max load on table | kg | 400 |
Spindle center to column | mm | 420 |
Spindle nose to table | mm | 150-480 |
X/Y/Z axis motor | KW | 1.5/1.5/3.0 |
X/Y/Z rapid feed | m/min | 48/48/48 |
Controller | Mitsubishi: M80B | |
Spindle taper | BT30 | |
Spindle speed | rpm | 20000 |
Spindle motor | kw | 5.5 |
Positioning accuracy | mm | ±0.003/300 |
Repeated accuracy | mm | ±0.002/300 |
Air pressure | kg/cm² | 6~7bar |
Dimension | mm | 1800x2510x2430 |
Weight | kg | 3700 |
- Strengthened column and base for better rigidity with reasonable lightweight design of worktable, saddle and spindle box to ensures the machine efficiency and rigidity at the same time.
- Top brand screw in X/Y/Z axis with low noise, friction, low temperature rise, lower the extension and deformation, while better acceleration and stability.
- X/Y/Z axis screw with locking pretension design to reduce the accuracy variation caused by thermal expansion.
- Roller linear guide in Z axis with large span design for better rigidity and stability.
- Widen spindle hole to upgrade spindle rigidity and spindle broaching force

◆Kindly notice that configuration and appearance are subject to fine products.

Saddle
Double T extra-wide structure to improve rigidity and stability during rapid feed.
Double T extra-wide structure to improve rigidity and stability during rapid feed.

Guide way
X/Y/Z axis ball linear guideway, rapid speed is 48 m/min.
X/Y/Z axis ball linear guideway, rapid speed is 48 m/min.

Workpiece cooling system
The high-pressure flushing cooling system removes the processing heat in time and maintains the constant temperature conditions during processing, ensure the processing accuracy and surface finish.
The high-pressure flushing cooling system removes the processing heat in time and maintains the constant temperature conditions during processing, ensure the processing accuracy and surface finish.

Controller system
Mitsubishi/Fanuc/Siemens controller system optional.
Mitsubishi/Fanuc/Siemens controller system optional.

Metal shield
3 axis adopt enclosed telescopic metal shield to block the chips and cutting fluid and extends service life of guide and screw.
3 axis adopt enclosed telescopic metal shield to block the chips and cutting fluid and extends service life of guide and screw.

Spindle
High speed direct/built-in drive spindle with short nose design, improving machining accuracy and spindle life.
High speed direct/built-in drive spindle with short nose design, improving machining accuracy and spindle life.

Tool magazine
Clamping type 16T/21T tool magazine, tool exchange time is only 2 seconds, drastically reduce processing time.
Clamping type 16T/21T tool magazine, tool exchange time is only 2 seconds, drastically reduce processing time.

Screw
C3 grade high precision ball screw with pre-extension process, improve the transmission rigidity and machine accuracy.
C3 grade high precision ball screw with pre-extension process, improve the transmission rigidity and machine accuracy.
Standard Accessories
Optional Accessories
Item | Name |
1 | Mitsubishi M80B controller system |
2 | BT30 20000rpm direct drive spindle |
3 | Spindle blowing system |
4 | Spindle oil cooler |
5 | Automatic centralized lubrication system |
6 | Pneumatic system |
7 | Coolant flushing system |
8 | Heat exchanger for electrical cabinet |
9 | Operation manuals |
10 | Alarming light |
11 | Working light |
12 | Full enclosed cover |
13 | Guideway cover |
14 | BT30-21T aemless tool magazine |
1 | Mitsubishi M80A controller |
2 | Fanuc 0i-MF controller |
3 | Siemens 828D controller |
4 | BT30-21T armless servo tool magazine |
5 | 4th axis rotary table |
BF-T600 Vertical Tapping Machine
High speed drilling and tapping machine center is featured for high speed rotation, fast and high precision small hole machining and fast tool changing. It could be applied in the processing of small-plate parts, disc-shaped parts and shells, which is widely used in 3C, automotive, watches, electronics, small mold, medical treatment equipment and other industries.